|Pearl Flower Wedding Tiara|
This gorgeous pearl flower tiara was much easier to make than it looks! Using 0.3mm silver plated wire we thread pearls from our mixed pearl bead pack, along with crystal quartz chips onto the wire and then shaped this beaded wire into a four petal flower. We then attached this to a tiara base by wrapping the same wire through the flower and around the base. In the final few loops of wrapping the flower onto the base we added some crystal quartz chips to the centre and continued to wrap to add a real sparkle. To add stamen to the cenre of the flower we used a thicker 0.5mm wire to wrap around the centre of the flower and then wire wrapped a crystal quartz chip to the end of each one. This makes for a simply but elegant vintage style tiara!
|Silver Heart & Pearl Tiara|
Make a real statement with your tiara with this heart design. Here we wire wrapped pearls and crystal quartz chips around the tiara base using a 0.3mm silver plated wire. As we came to the centre of the tiara we wire wrapped sterling silver heart beads and a couple of heart links onto the base before continuing wrapping pearls and crystal quartz. To make the higher parts of the tiara we wire wrapped a mixture of pearl, crystal quartz and sterling silver beads onto long stems which we then wrapped around the base.
|Sparkly Cubic Zirconia Wedding Tiara|
As with the other tiaras we used a 0.3mm silver plated wire to wire wrap pearls and crystal quartz beads onto the tiara base. We then used snaptite settings to simply 'pop' some super sparkly cubic zirconia in (click here to see our instructions on using snaptite settings) We then used 0.3mm wire to push through the snaptites and twisted the wire together to give extra strength, this was then wire wrapped onto the base when it was at the right height. This is a simple and elegant design for adding super sparkle to that wedding 'up' do!